Close
You have no items in your shopping cart.

Teseq CDN 3063-S63 3 Phase, 63 Amp Automated Surge CDN Coupler for NSG 3040/3060

Manufacturer part number: CDN-3063-S63
Three phase 480 V/63 A automatic coupling decoupling network (CDN) for Surge and Ring Wave pulses up to 6.6 kV
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Key Features and Functions

The new, modular CDN 3063 continue Teseq’s philosophy of designing easily upgradeable test instruments that maximize the user’s initial investment. Users can select a CDN from this series that fulfills their basic testing needs with the assurance that they can upgrade it to a model to fit different generator compatibility as their testing requirements change. The CDN 3063 is designed for maximum reliability in a wide range of test setups. Over-temperature protection, which allows short term operation at currents exceeding the nominal rating, prevents damage to internal components.

The fully automated IEC and ANSI compliant coupling networks fulfill the new requirements for EUT currents over 16 A in the surge standard IEC / EN 61000-4-5:2005, as well special coupling modes and pulse amplitude control in the ANSI C62.45 standard, ring wave pulse given in IEC / EN 61000-4-12:2006.

The Teseq CDN 3063-S63 3 Phase, 63 Amp Automated Surge CDN Coupler for NSG 3040/3060 couples surge and burst pulses into 1-, 2- or 3-phase power mains of up to 480V with a current range up to 63 Amps. This range incorporates the new IEC draft standard’s provision for testing EUT’s with high power consumption. Reduced decoupling inductances in series with the EUT power connection are specified in order to minimize series voltage losses.

Voltage RatingEUT VAC line to line: 30 to 480 VAC rms; EUT VAC line to ground: EUT VAC 30 to 280 VAC rms, (below 30 V synchronisation not guaranteed, asynchronous mode only); EUT VDC: up to 125 VDC – full current range, up to 225 VDC – up to 7 A
Frequency RangeDC – 65 Hz with no loss, 400 Hz max. with power loss
Standards MetIEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41
Mains & EUT ConnectionsHV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)
Current Rating3 x 63 Amp continuous (peak 3 x 100 Amp for 30 min.)
Application/Test TypeAutomated Surge Testing for EUT up to 63 Amps, 480 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)
Dimensions570 x 840 x 630mm (22.4 x 33 x 24.8")
Weight100 kg (220.5 lb)
Description

Key Features and Functions

The new, modular CDN 3063 continue Teseq’s philosophy of designing easily upgradeable test instruments that maximize the user’s initial investment. Users can select a CDN from this series that fulfills their basic testing needs with the assurance that they can upgrade it to a model to fit different generator compatibility as their testing requirements change. The CDN 3063 is designed for maximum reliability in a wide range of test setups. Over-temperature protection, which allows short term operation at currents exceeding the nominal rating, prevents damage to internal components.

The fully automated IEC and ANSI compliant coupling networks fulfill the new requirements for EUT currents over 16 A in the surge standard IEC / EN 61000-4-5:2005, as well special coupling modes and pulse amplitude control in the ANSI C62.45 standard, ring wave pulse given in IEC / EN 61000-4-12:2006.

The Teseq CDN 3063-S63 3 Phase, 63 Amp Automated Surge CDN Coupler for NSG 3040/3060 couples surge and burst pulses into 1-, 2- or 3-phase power mains of up to 480V with a current range up to 63 Amps. This range incorporates the new IEC draft standard’s provision for testing EUT’s with high power consumption. Reduced decoupling inductances in series with the EUT power connection are specified in order to minimize series voltage losses.