Close
You have no items in your shopping cart.

Teseq CDN M216 1kV CDN

Manufacturer part number: CDN M216
CISPR 16-2-1 and CISPR 15, 150 kHz - 230 MHz
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Key Features and Functions

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Whilst the published standard only specifies the performance of CDN from 150 kHz to 80 MHz, most of Teseq CDNs are specially designed to give the same performance to a wider frequency range. This is required by some product specific standards. Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.

Teseq CDN M216 Features:

  • Frequency range 150 kHz - 230 MHz (Optional 10 kHz - 80 MHz)
  • 433 Volts AC (Optional 1,000 Volts)
  • Designed for IEC/EN 61000-4-6
  • Conforms with CISPR 16-1-2
  • Enables testing to CISPR 16-2-1 and CISPR 15 CDN method
  • Excellent performance
  • Calibration kit available
  • 4 mm banana sockets
  • CDN for M2 application

Teseq CDN M216 Configurations:

  • CDN M216S: 16 Amps, 150 kHz - 230 MHz, 4mm banana (L,N)
  • CDN M216-10S: 16 Amps, 10 kHz - 80 MHz, 4mm banana (L,N)
  • CDN M216-1000VS: M216S-1000VAC, 2000VDC , 4mm banana (L,N)

Voltage RatingAC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
Frequency Range150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Standards MetIEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
RF ConnectorBNC, 50 Ω
Mains & EUT Connections4 mm, safety
Common Mode Impedance150 Ω +10/-20 Ω
Current Rating10 Amps Maximum
Application/Test TypeEmission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency range.
Insertion LossGreater than 0.1 dB
RF Input VoltageLess than 30 V
Decoupling of Common Mode DisturbanceGreater than 30 dB
Voltage Division Factor20 dB ±1.5 dB
Dimensions4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Weight700 grams (1.5 LB.'s)
Description

Key Features and Functions

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Whilst the published standard only specifies the performance of CDN from 150 kHz to 80 MHz, most of Teseq CDNs are specially designed to give the same performance to a wider frequency range. This is required by some product specific standards. Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.

Teseq CDN M216 Features:

  • Frequency range 150 kHz - 230 MHz (Optional 10 kHz - 80 MHz)
  • 433 Volts AC (Optional 1,000 Volts)
  • Designed for IEC/EN 61000-4-6
  • Conforms with CISPR 16-1-2
  • Enables testing to CISPR 16-2-1 and CISPR 15 CDN method
  • Excellent performance
  • Calibration kit available
  • 4 mm banana sockets
  • CDN for M2 application

Teseq CDN M216 Configurations:

  • CDN M216S: 16 Amps, 150 kHz - 230 MHz, 4mm banana (L,N)
  • CDN M216-10S: 16 Amps, 10 kHz - 80 MHz, 4mm banana (L,N)
  • CDN M216-1000VS: M216S-1000VAC, 2000VDC , 4mm banana (L,N)
Product tags