Close
You have no items in your shopping cart.

Teseq CDN M416 4-Line Coupling/Decoupling Network

Manufacturer part number: CDN M416
150 kHz–80 MHz
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Key Features and Functions

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

  • 4 power lines, (2L+N+PE), (3L+PE), optional (3L+N)
  • Frequency range: 150 kHz to 80 MHz
  • Designed for IEC/EN 61000-4-6
  • M4 application without PE
  • 4 mm banana sockets
  • Power Rating: 250VAC/400VDC line to ground
Voltage RatingAC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
Frequency Range150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Standards MetIEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
RF ConnectorBNC, 50 Ω
Mains & EUT Connections4 mm, safety (Optional IEC 320 16A)
Common Mode Impedance150 Ω +10/-20 Ω
Current Rating10 Amps Maximum
Application/Test Type3 power lines, (L+N+PE), (2L+PE), (Optional L+L+L)
Insertion LossGreater than 0.1 dB
RF Input VoltageLess than 30 V
Decoupling of Common Mode DisturbanceGreater than 30 dB
Voltage Division Factor20 dB ±1.5 dB
Dimensions4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Weight700 grams (1.5 LB.'s)
Description

Key Features and Functions

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

  • 4 power lines, (2L+N+PE), (3L+PE), optional (3L+N)
  • Frequency range: 150 kHz to 80 MHz
  • Designed for IEC/EN 61000-4-6
  • M4 application without PE
  • 4 mm banana sockets
  • Power Rating: 250VAC/400VDC line to ground
Product tags