|
17025 Accredited Calibration Certificate |
$0.00 |
|
Software License for one generator CWS, NSG 4070 |
$0.00 |
|
Rack Mounting Handles |
$0.00 |
|
LE 4070 Cable Set (4 cables, 2 adapters) |
$0.00 |
|
- RF cable, N(m)-N(m), 3m w/ one right-angle plug |
$0.00 |
|
- RF cable, BNC(m)-N(m), 1 m, RG223 |
$0.00 |
|
- RF cable, N(m)-N(m), 120 mm, RG58 |
$0.00 |
|
- Adapter N(m)-N(m) |
$0.00 |
|
- Adapter N(f)-BNC(m) |
$0.00 |
|
Attenuator 6dB, 100W, DC-1.5GHz, N(m)-N(f) |
$0.00 |
|
- N(f)-N(f) adapter for 6dB attenuator |
$0.00 |
|
Attenuator 20dB, 10W, DC-18GHz, N connectors |
$0.00 |
|
CDN M016S: AC Mains Coupling Decoupling Network |
$0.00 |
|
Screened Coupling Decoupling Network – USB 3.0 CDN |
$0.00 |
|
CAS CDNE: Calibration Kit for CDNE |
$0.00 |
|
- Traceable calibration for EN55015 requirements |
$0.00 |
|
10kHz - 1GHz EM Clamp w/ Cal Kit, 50Ohm & 2W Term |
$0.00 |
|
RF Attenuation Clamp, 150kHz to 1GHz |
$0.00 |
|
Traceable Calibration Certificate for KEMA 801 |
$0.00 |
|
Calibration fixture for KEMZ / KEMA |
$0.00 |
|
CAL 801A Calibration unit for EM clamp (dual unit) |
$0.00 |
|
DAkkS accredited calibration (ISO17025) |
$0.00 |
|
Current Monitor Probe, 10kHz – 400MHz |
$0.00 |
|
- PSU 6001 Power Supply for MD 4070A |
$0.00 |
|
- LE 242 Control Cable for MD 4070A |
$0.00 |
|
- Traceable Cal for MD 4070 Monitoring Probe |
$0.00 |
|
PCJ9201B Calibration Jig for CIP 9136 |
$0.00 |
|
- Positioning fixture for MD 4070 in PCJ 9201 |
$0.00 |
|
Dual directional coupler 10kHz - 1000MHz |
$0.00 |
|
Accredited Calibration (17025) for DCP 0100A |
$0.00 |
|
Terminator 50 Ohm, 25W, DC-18GHz, N-male connector |
$0.00 |
|
- CAL U100B - 50 Ω/150 Ω-adapter |
$0.00 |
|
- TRA U0-150 - Termination Load, 0 Ω and 150 Ω |
$0.00 |
|
Pelican AL2825-1612AC/HL Single Lid Case |
$0.00 |
|
Teseq BCI Accessories |
$0.00 |
|
C6047-10 Dual Directional Coupler, 10kHz to 400MHz |
$0.00 |
|
CIP 9136A Current injection probe 4kHz-400MHz |
$0.00 |
|
CIP-TC Traceable calibration, order only with CIP |
$0.00 |
|
CIP 9136-ACC Accredited calibration (ISO17025) |
$0.00 |
|
PCJ 9201B Calibration jig for current probes |
$0.00 |
|
PCJ 9201-TC Traceable calibration |
$0.00 |
|
PCJ 9201-ACC Accredited calibration (ISO17025) |
$0.00 |
|
MD 4070A Monitoring device, 10kHz – 400MHz |
$0.00 |
|
- PSU 6001 Power Supply for MD 4070A |
$0.00 |
|
- LE 242 Control Cable for MD 4070A |
$0.00 |
|
MD 4070-TC Traceable Calibration |
$0.00 |
|
4070-ACC Accredited calibration (ISO17025) |
$0.00 |
|
Positioning fixture for MD 4070 in PCJ 9201 |
$0.00 |
