Contact us 800.813.8448

Recently added item(s) ×

You have no items in your shopping cart.

Teseq ProfLine 2103-240 3 kVA Single Phase Harmonics & Flicker Measuring System

Model Number: ProfLine 2103

Teseq ProfLine 2103-240 3 kVA Single Phase Harmonics & Flicker Measuring System

Click on above image to view full picture

Condition

New

Availability
  • Quote to Rent/Lease
Description

Teseq ProfLine 2103-240 3 kVA single Phase Harmonics & Flicker Measuring System

ProfLine 2103 is an accurate and flexible single phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3, supporting testing on products consuming up to 11 Arms and 92 A peak @ 230 VAC. The system is supplied complete with a stable, accurate, programmable 3 kVA power source. The ProfLine 2103 system is therefore ready to measure and record any harmonics & flicker created by the EUT. A wide range of higher power AC source systems are available from Teseq, please see ProfLine 2105, 2115, 2130, 2145 datasheets for suitable systems at higher power or for three phase operation.

Measurements are made using precision, no burden, active hall-effect current transformers connected via a dedicated cable to a multichannel fast Data Acquisition Card (DAQ) fitted inside a PC. One voltage and three current measuring channels are used to make simultaneous measurement of both current and voltage. Calculations are made using dedicated Teseq software (WIN 2100) to determine harmonics (classes A-D), inter-harmonics, flicker, dc, dt, dmax, Pst, Plt, inrush current and 24 x dmax.

Features:

  • Low cost system for small DUTs
  • Complete test system including clean power source
  • Simulated flicker impedance, no need for expensive physical impedance
Test Standards
  •  IEC 61000-3-11
  •   IEC 61000-3-12
  •   IEC 61000-3-2
  •   IEC 61000-3-3
  •   IEC 61000-4-11
  •   IEC 61000-4-12
  •   IEC 61000-4-14
  •   IEC 61000-4-17
  •   IEC 61000-4-28
  •   IEC 61000-4-29
  •   IEC 61000-4-8
  •   RTCA/DO160
Specifications

Power Source

  • Power output (AC mode) 3,000 VA
  • Voltage AC, two ranges 0-150 V and 0-300 V
  • Maximum current (low range) 22.2 Amps, 110 Amps peak repetitive
  • Maximum current (high range) 11.1 Amps, 96 Amps peak repetitive
  • Frequency range (AC mode) 16 Hz – 1000 Hz
  • Power output (DC mode) 2,100 watts
  • Voltage DC, two ranges 0-200 V and 0-400 V
  • Maximum current (low range) 15.6 Amps
  • Maximum current (high range) 7.8 Amps
  • Supply 1-phase, 240 Vac L-N, 50/60 Hz
  • Dimensions (HxWxD) 178 x 483 x 610 mm
  • Weight 28 kg

Coupling unit

  • Number of phases 1
  • Measurement channels 4
  • EUT connector: Front panel CEE 77
  • EUT connector: Rear panel Terminal block
  • Maximum voltage: Front panel 240 Vac
  • Maximum current: Front panel 16 Arms
  • Maximum voltage: Rear panel 300 Vac
  • Maximum current: Rear panel 40 Arms (200 A Pk for 10 ms)
  • Supply power: Voltage 115/230 Vac +/- 10%
  • Supply power: Current <0.5 A
  • Supply power: Frequency 50/60 Hz
  • Dimensions (HxWxD) 89 x 427 x 560 mm
  • Weight 5 kg
Standard Accessories Included
  • NSG 1007-3-240 Power source
  • CCN 1000-1 single phase coupling unit
  • DAQ card
  • Interface cable
  • WIN 2100 H&F test software
  • WIN 2110 PQT test software
  • Pre-configured PC
  • USB cable
$0.00

Request a Quote