Close
You have no items in your shopping cart.

Teseq TPL 3000 Tri-Plate Line

Manufacturer part number: TPL-3000
The Tri-Plate test method is specified in the surface vehicle standard SAE J1113-25 ”Electromagnetic Compatibility Measurement Procedure for Vehicle Components-Immunity to Radiated Electromagnetic Fields, 10 kHz to 1 GHz” and applicable for testing products such as air-bag control modules, engine and transmission control modules and other subsystems and their associated cables.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The Tri-Plate test method is specified in the surface vehicle standard SAE J1113-25 ”Electromagnetic Compatibility Measurement Procedure for Vehicle Components-Immunity to Radiated Electromagnetic Fields, 10 kHz to 1 GHz” and applicable for testing products such as air-bag control modules, engine and transmission control modules and other subsystems and their associated cables.

The EUT height should be less than 1 / 3 of the distance between septum and outer plates. The Tri-Plate Line (TPL) works as an open TEM cell. It is a broadband parallel-plate construction with grounded top and bottom outer plates and an isolated center-plate. When RF signals are input at one end, the TPL will generate an electro-magnetic field between the plates. The opposite end is terminated with a 50 Ω load. A typical test configuration consists of signal generator, power amplifiers, power meters, TPL, 50 Ω load and (absorber lined) shielded room.

The TPL 3000 is designed as specified in the SAE J1113-25. The TPL 3000 is shipped in a transportable form with complete assembly instructions for customer on-site installation.

  • Frequency Range: 10 kHz to 1 GHz
  • Max. Input Power: 1000 W
  • Connectors: N-Type, 50 Ω, female
  • Typical Impedance: 72 Ω
  • Input Power for 10 V/m: Approx. 0.2 W (23 dBm)
  • Distance Between the Plates: 300 mm
  • Dimensions: 3.0 m x 1.2 m x 1.65 m (including ground plane and table)
  • SAE J1113-25
  • Mazda MES PW 67600
Description

The Tri-Plate test method is specified in the surface vehicle standard SAE J1113-25 ”Electromagnetic Compatibility Measurement Procedure for Vehicle Components-Immunity to Radiated Electromagnetic Fields, 10 kHz to 1 GHz” and applicable for testing products such as air-bag control modules, engine and transmission control modules and other subsystems and their associated cables.

The EUT height should be less than 1 / 3 of the distance between septum and outer plates. The Tri-Plate Line (TPL) works as an open TEM cell. It is a broadband parallel-plate construction with grounded top and bottom outer plates and an isolated center-plate. When RF signals are input at one end, the TPL will generate an electro-magnetic field between the plates. The opposite end is terminated with a 50 Ω load. A typical test configuration consists of signal generator, power amplifiers, power meters, TPL, 50 Ω load and (absorber lined) shielded room.

The TPL 3000 is designed as specified in the SAE J1113-25. The TPL 3000 is shipped in a transportable form with complete assembly instructions for customer on-site installation.

Product tags