CISPR Standards
Develops standards that offer protection of radio reception of >9kHz from interference sources such as electrical appliances of all types, the electricity supply system, industrial, scientific and electromedical RF, broadcasting receivers (sound and TV) and, increasingly, IT equipment (ITE).
-
Com-Power LI-125A Line Impedance Stabilization Network (LISN)
Model Number: LI-125A From: Com-Power
150 kHz to 30 MHz,
CISPR 16-1-2 / ANSI C63.4,
50 microhenry / 25 Amps View Details
- Immediate Purchase
- Quote to Purchase
150 kHz to 30 MHz, CISPR 16-1-2 / ANSI C63.4, 50 microhenry / 25 Amps View Details -
Com-Power CLCI-100 Current Probe
Model Number: CLCI-100 From: Com-Power
The Com-Power Current Injection Probes are used for RF conducted immunity testing per IEC 61000-4-6, CISPR 16-1-2, RTCA DO-160, and MIL-STD 461. View Details
- Immediate Purchase
- Quote to Purchase
The Com-Power Current Injection Probes are used for RF conducted immunity testing per IEC 61000-4-6, CISPR 16-1-2, RTCA DO-160, and MIL-STD 461. View Details -
Teseq GTEM-1000 GTEM Cell
Model Number: GTEM-1000 From: Teseq
The Teseq GTEM-1000 Gigahertz Transverse Electro Magnetic Cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. View Details
- Immediate Purchase
- Quote to Rent/Lease
- Quote to Purchase
The Teseq GTEM-1000 Gigahertz Transverse Electro Magnetic Cell is a test site for efficiently performing both radiated immunity and emissions testing in a single, controllable and shielded environment. View Details -
Com-Power CDN-USB-AE Coupling/Decoupling Network (CDN)
Model Number: CDN-USB-AE From: Com-Power
The Com-Power CDN-USB-AE is a Coupling/Decoupling Network designed specifically for testing products for conducted immunity per IEC/EN 61000-4-6. It is designed for testing products that use USB cables for communication. It has a USB type A on the EUT side and USB Type B on the AE side. View Details
- Immediate Purchase
- Quote to Purchase
The Com-Power CDN-USB-AE is a Coupling/Decoupling Network designed specifically for testing products for conducted immunity per IEC/EN 61000-4-6. It is designed for testing products that use USB cables for communication. It has a USB type A on the EUT side and USB Type B on the AE side. View Details -
Com-Power ISN-T8 Impedance Stabilization Network
Model Number: ISN-T8 From: Com-Power
ISN T8 design is based on the circuit illustrated in Figure D.3 of CISPR 22 and Figure F8 of CISPR 32. The RF Port is a 50 Ohm female BNC connector, located on the top of the ISN. The ISN is equipped with two D-sub 25 pin female connectors located on the front panel (EUT Port) and rear panel (AE Port), providing the interface to the LCL Adapter and Connecting Adapter, respectively. View Details
- Immediate Purchase
- Quote to Rent/Lease
- Quote to Purchase
ISN T8 design is based on the circuit illustrated in Figure D.3 of CISPR 22 and Figure F8 of CISPR 32. The RF Port is a 50 Ohm female BNC connector, located on the top of the ISN. The ISN is equipped with two D-sub 25 pin female connectors located on the front panel (EUT Port) and rear panel (AE Port), providing the interface to the LCL Adapter and Connecting Adapter, respectively. View Details -
Com-Power CDN-T8E Coupling/Decoupling Network (CDN)
Model Number: CDN-T8E From: Com-Power
The Com-Power CDN-T8E is a Coupling/Decoupling Network designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. View Details
- Immediate Purchase
- Quote to Purchase
The Com-Power CDN-T8E is a Coupling/Decoupling Network designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. View Details -
Com-Power CIS-50 Conducted Immunity System
Model Number: CIS-50 From: Com-Power
Com-Power CIS-50 Conducted Immunity System; the CIS series test systems are configured to perform conducted immunity testing according to IEC 61000-4-6. View Details
- Immediate Purchase
- Quote to Rent/Lease
- Quote to Purchase
Com-Power CIS-50 Conducted Immunity System; the CIS series test systems are configured to perform conducted immunity testing according to IEC 61000-4-6. View Details -
Com-Power CDN-T2E Coupling/Decoupling Network (CDN)
Model Number: CDN-T2E From: Com-Power
The Com-Power CDN-T2E is a Coupling/Decoupling Network designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. View Details
- Immediate Purchase
- Quote to Purchase
The Com-Power CDN-T2E is a Coupling/Decoupling Network designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. View Details -
Com-Power AL-130 Active Loop Antenna
Model Number: AL-130 From: Com-Power
The AL-130 Active Loop antenna is used magnetic field EMI emissions testing. It has a built in preamplifier which helps the antenna produce good sensitivity and almost constant antenna factors. View Details
- Immediate Purchase
- Quote to Purchase
The AL-130 Active Loop antenna is used magnetic field EMI emissions testing. It has a built in preamplifier which helps the antenna produce good sensitivity and almost constant antenna factors. View Details -
Com-Power CDN-AF4E Coupling/Decoupling Network (CDN)
Model Number: CDN-AF4E From: Com-Power
The Com-Power CDN-AF4E is a Coupling/Decoupling Network designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. View Details
- Immediate Purchase
- Quote to Purchase
The Com-Power CDN-AF4E is a Coupling/Decoupling Network designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. View Details -
Com-Power AD-100 Tuned Dipole Antenna Antenna
Model Number: AD-100 From: Com-Power
The Com-Power model AD-100 is a standard antenna set which operates in the frequency range of 30MHz to 1GHz. This set consists of four baluns and was designed according to American National Standard C63.4. View Details
- Immediate Purchase
- Quote to Purchase
The Com-Power model AD-100 is a standard antenna set which operates in the frequency range of 30MHz to 1GHz. This set consists of four baluns and was designed according to American National Standard C63.4. View Details -
Com-Power CDN-C75E Coupling/Decoupling Network (CDN)
Model Number: CDN-C75E From: Com-Power
The Com-Power CDN-C75E is a Coupling/Decoupling Network designed specifically for testing products for conducted immunity per IEC/EN 61000-4-6. View Details
- Immediate Purchase
- Quote to Rent/Lease
- Quote to Purchase
The Com-Power CDN-C75E is a Coupling/Decoupling Network designed specifically for testing products for conducted immunity per IEC/EN 61000-4-6. View Details -
Com-Power CLA-050 Absorbing Clamp
Model Number: CLA-050 From: Com-Power
The absorbing clamp CLA-050 was designed for EMC emissions measurement of from electrical instruments via their connecting leads. It has a 10 mm cable aperture. View Details
- Immediate Purchase
- Quote to Purchase
The absorbing clamp CLA-050 was designed for EMC emissions measurement of from electrical instruments via their connecting leads. It has a 10 mm cable aperture. View Details -
Com-Power LI-550A Line Impedance Stabilization Network (LISN)
Model Number: LI-550A From: Com-Power
100 kHz to 108 MHz,
CISPR 25 / CISPR 16-1-2,
5 microhenry / 50 Amps View Details
- Immediate Purchase
- Quote to Purchase
100 kHz to 108 MHz, CISPR 25 / CISPR 16-1-2, 5 microhenry / 50 Amps View Details -
Com-Power LIN-120A Line Impedance Stabilization Network (LISN)
Model Number: LIN-120A From: Com-Power
150 kHz to 30 MHz,
CISPR 16-1-2 / ANSI C63.4,
50 microhenry / 20 Amps View Details
- Immediate Purchase
- Quote to Purchase
150 kHz to 30 MHz, CISPR 16-1-2 / ANSI C63.4, 50 microhenry / 20 Amps View Details -
Com-Power LI-150A Line Impedance Stabilization Network (LISN)
Model Number: LI-150A From: Com-Power
150 kHz to 30 MHz,
CISPR 16-1-2 / ANSI C63.4,
50 microhenry / 50 Amps View Details
- Immediate Purchase
- Quote to Purchase
150 kHz to 30 MHz, CISPR 16-1-2 / ANSI C63.4, 50 microhenry / 50 Amps View Details -
Amplifier Research DER2018 20 Hz to 18GHz Digital EMI Receiver
Model Number: DER2018 From: Amplifier Research
Amplifier Research DER2018 20Hz to 18GHz Digital EMI Receiver offers continuous coverage from 20Hz to 18GHz with 140MHz instantaneous bandwidth. This receiver combines state-of-the-art sensitivity, dynamic range, accuracy and convenience of operation. View Details
- Quote to Rent/Lease
- Quote to Purchase
Amplifier Research DER2018 20Hz to 18GHz Digital EMI Receiver offers continuous coverage from 20Hz to 18GHz with 140MHz instantaneous bandwidth. This receiver combines state-of-the-art sensitivity, dynamic range, accuracy and convenience of operation. View Details -
Com-Power LI-215A Line Impedance Stabilization Network (LISN)
Model Number: LI-215A From: Com-Power
9 kHz to 30 MHz,
CISPR 16-1-2 / ANSI C63.4,
250 & 50 microhenry / 15 Amps View Details
- Immediate Purchase
- Quote to Purchase
9 kHz to 30 MHz, CISPR 16-1-2 / ANSI C63.4, 250 & 50 microhenry / 15 Amps View Details -
Com-Power CDN-USB-BE Coupling/Decoupling Network (CDN)
Model Number: CDN-USB-BE From: Com-Power
Com-Power CDN-USB-BE Coupling/Decoupling Network (CDN) View Details
- Immediate Purchase
- Quote to Purchase
Com-Power CDN-USB-BE Coupling/Decoupling Network (CDN) View Details -
Com-Power CDN-T8SE Coupling/Decoupling Network (CDN)
Model Number: CDN-T8SE From: Com-Power
The Com-Power CDN-T8SE is used during conducted emissions or immunity tests on devices with signal/telecom ports intended for connection to shielded (or screened) lines with up to four balanced pairs. View Details
- Immediate Purchase
- Quote to Purchase
The Com-Power CDN-T8SE is used during conducted emissions or immunity tests on devices with signal/telecom ports intended for connection to shielded (or screened) lines with up to four balanced pairs. View Details -
Com-Power CIS-100 Conducted Immunity System
Model Number: CIS-100 From: Com-Power
Com-Power CIS-100 Conducted Immunity System; the CIS series test systems are configured to perform conducted immunity testing according to IEC 61000-4-6. View Details
- Immediate Purchase
- Quote to Rent/Lease
- Quote to Purchase
Com-Power CIS-100 Conducted Immunity System; the CIS series test systems are configured to perform conducted immunity testing according to IEC 61000-4-6. View Details -
Com-Power CDN-T4E Coupling/Decoupling Network (CDN)
Model Number: CDN-T4E From: Com-Power
The Com-Power CDN-T4E is a Coupling/Decoupling Network designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. View Details
- Immediate Purchase
- Quote to Purchase
The Com-Power CDN-T4E is a Coupling/Decoupling Network designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. View Details -
Com-Power CIS-25 Conducted Immunity System
Model Number: CIS-25 From: Com-Power
The CIS series test systems are configured to perform conducted immunity testing according to IEC 61000-4-6. The CIS series test systems are configured to perform conducted immunity testing according to IEC 61000-4-6. View Details
- Immediate Purchase
- Quote to Rent/Lease
- Quote to Purchase
The CIS series test systems are configured to perform conducted immunity testing according to IEC 61000-4-6. The CIS series test systems are configured to perform conducted immunity testing according to IEC 61000-4-6. View Details -
Com-Power CDN-AF8E Coupling/Decoupling Network (CDN)
Model Number: CDN-AF8E From: Com-Power
The Com-Power CDN-AF8E is a Coupling/Decoupling Network designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. View Details
- Immediate Purchase
- Quote to Purchase
The Com-Power CDN-AF8E is a Coupling/Decoupling Network designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. View Details -
Com-Power ABM-6000 Microwave Biconical Antenna
Model Number: ABM-6000 From: Com-Power
The ABM-6000 Microwave Biconical antenna is specifically designed to be the transmit source antenna for test site validations above 1GHz per CISPR 16-1-4 Site Voltage Standing Wave Ratio (SVSWR) procedure. View Details
- Immediate Purchase
- Quote to Purchase
The ABM-6000 Microwave Biconical antenna is specifically designed to be the transmit source antenna for test site validations above 1GHz per CISPR 16-1-4 Site Voltage Standing Wave Ratio (SVSWR) procedure. View Details
