Close
You have no items in your shopping cart.
Search

Fluke Ti400 Infrared Camera

Manufacturer part number: Ti400
Technology changes. The last thing we want is for you to feel like you’re missing out on critical innovations, so Fluke has engineered the Ti400 infrared camera to adapt to change.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The Fluke Ti400 infrared camera is equipped with LaserSharp™ AutoFocus for perfectly focused images. Every. Single. Time. Every infrared camera user knows that focus is the single most important thing to ensure when conducting an infrared inspection. Without an in-focus image temperature measurements may not be accurate, sometimes by as much as 20 degrees, so it’s much easier to miss a problem. LaserSharp auto focus tells you exactly where you are focusing. It uses a laser to calculate the distance to your target before it focuses. Place the red laser dot on the equipment you are inspecting, then pull and release the trigger for a perfect in-focus image.

Key Features and Functions

  • Thermal imager with standard infrared lens
  • AC power supply and battery pack charger (including mains adapters)
  • Two, rugged lithium ion smart battery packs
  • Micro SD memory card with SD adapter
  • 3m USB cable
  • 3m HDMI video cable
  • SmartView® software with free software upgrades for life
  • Rugged, hard carrying case
  • Soft transport bag
  • Adjustable hand strap
  • CD user’s manual
  • Detector Resolution: 320 x 240 (76,800 pixels)
  • Temperature Measurement Range (not calibrated below -10°C): -20°C to 1200°C (-4°F to 2192°F)
  • Accuracy: ± 2 °C or 2 % (at 25°C nominal, whichever is greater)
  • Color Alarms (Temperature Alarms): High temperature, low temperature, and isotherms (within range)
  • Infrared Spectral Band: 7.5 μm to 14 μm (long wave)
  • Operating Temperature: -10°C to 50°C (14°F to 122°F)
  • Storage Temperature: -20°C to 50°C (-4°F to 122°F) without batteries
  • Relative Humidity: 10 % to 95 % non-condensing
  • Center-Point Temperature Measurement: Yes
  • Spot Temperature: Hot and cold spot markers
  • User-Definable Spot Markers: 3 user-definable spot markers
  • Center Box: Expandable-contractible measurement box with MIN-MAX-AVG temp display
  • Vibration: 0.03 g2/Hz (3.8 g), 2.5 g IEC 68-2-6
  • Shock: 25 g, IEC 68-2-29
  • Drop: Engineered to withstand 2 meter (6.5 feet) drop with standard lens
  • Dimensions: 27.7 cm x 12.2 cm x 16.7 cm (10.9 in x 4.8 in x 6.5 in)
  • Weight (Battery Included): 1.04 kg (2.3 lb)
Description

The Fluke Ti400 infrared camera is equipped with LaserSharp™ AutoFocus for perfectly focused images. Every. Single. Time. Every infrared camera user knows that focus is the single most important thing to ensure when conducting an infrared inspection. Without an in-focus image temperature measurements may not be accurate, sometimes by as much as 20 degrees, so it’s much easier to miss a problem. LaserSharp auto focus tells you exactly where you are focusing. It uses a laser to calculate the distance to your target before it focuses. Place the red laser dot on the equipment you are inspecting, then pull and release the trigger for a perfect in-focus image.

Key Features and Functions

  • Thermal imager with standard infrared lens
  • AC power supply and battery pack charger (including mains adapters)
  • Two, rugged lithium ion smart battery packs
  • Micro SD memory card with SD adapter
  • 3m USB cable
  • 3m HDMI video cable
  • SmartView® software with free software upgrades for life
  • Rugged, hard carrying case
  • Soft transport bag
  • Adjustable hand strap
  • CD user’s manual