Close
You have no items in your shopping cart.

Transient generators are used in conducted immunity testing by simulating transients. Drastic fluctuation in current or voltage on a device while connected to a power grid is considered a transient. The susceptibility of a device is determined through conducted immunity testing and transient generators are used to test the device's immunity to transients through the simulation of transients found in real-life situations. A common cause of transients is lightning, which may strike close by creating a surge that causes electrical and electromagnetic interference. A device on a grid can also be a source by sending a transient to another device on the grid when switched on. Both circumstances, along with many more, can be simulated with a transient generator through waveform variation. EMC transient generators are designed to be used for medical, IT, industrial, and commercial devices with specific test standards.

Avalon offers a variety of transient generators based on conducted immunity test standards for your specific requirements. Test With Confidence®.

Conducted Immunity Test Standards

EN/IEC 61000-4-4  EN/IEC 61000-4-5  EN/IEC 61000-4-8  EN/IEC 61000-4-9  EN/IEC 61000-4-10  EN/IEC 61000-4-11  EN/IEC 61000-4-12 

  EN/IEC 61000-4-29  

Read More

Read Less

3 Items in Grid 4 Items in Grid List

Teseq NSG 4070C-80 Compact Immunity Test System

With integrated power amplifier 80 W module 150 kHz–230 MHz

EM Test Compact NX7 Multifunctional Test Generator

The three-phase coupling/decoupling networks of the coupling NX series are used to couple EFT/Burst-, Surge- and Ring wave pulses on DC-lines or to three-phase (4-wire or 5-wire) mains supply systems for voltages up to 1,000 VDC / 3 x 690 VAC.

M Precision EMCPro Plus EMC Test System

Thermo Scientific EMCPro Plus EMC Test System; expandable, portable, multi-function EMC test system for pre-compliance, QA, and full certification testing. Test for up to seven global EMC standards for susceptibility to electromagnetic interference and electromagnetic compatibility with a single instrument.

Rohde & Schwarz ESU8 EMI Test Receiver

The R&S® ESU is a family of CISPR 16-1-1-compliant EMI test receivers that meet all civil and military standards for electromagnetic disturbance measurements.

EM Test AutoWave Arbitrary Generator

For Generating and Recording Automotive Waveforms

Haefely ONYX 30 ESD Simulator/Gun

The Haefely ONYX 30 ESD Simulator/Gun, 30kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 30kV guns on the market. Test with confidence®.

EM Test VDS 200Q100 4-Quadrant Voltage Drop Simulator

The VDS 200Q series is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Available to rent!

Haefely ONYX 16 ESD Simulator/Gun

Haefely ONYX 16 ESD Simulator/Gun, 16kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 16kV guns on the market.

EM Test DPA 503N 3-Phase Power Analyzer With Harmonics & Flicker

The DPA 503N is used for 3-phase applications but also supports single phase applications.

EM Test LD 200N Load Dump Generator

In stock and ready to rent at Avalon! Load Dump pulses simulate a sudden battery disconnection from the alternator.

Teseq NSG 3150 15 kV Combination Wave Surge Generator

TESEQ’s new NSG 3150 15 kV Combination Wave Surge generator sets a new standard in the industry and represents the perfect solution for your immunity tests in compliance with IEC/EN 61000-4-5.

EM Test Compact NX5 Modular Ultra Compact Simulator

This compact generator tests according to a number of standards. Request a quote now! Fast solutions to move your business forward. Call our sales team today.

Teseq CDN 3063-S63 3 Phase, 63 Amp Automated Surge CDN Coupler for NSG 3040/3060

Three phase 480 V/63 A automatic coupling decoupling network (CDN) for Surge and Ring Wave pulses up to 6.6 kV

Teseq NSG 3040-IEC Multifunction Burst Generator

Teseq’s new NSG 3040 is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards.

Teseq NSG 3060 Conducted Immunity Transient Generator

Mainframe NSG 3060 with CWM 3650, RWM 3652 and FTM 3425 including CDN 3061-C61 and PQM 3403 includes WIN 3000 basic software and traceable calibration certificate.

EM Test CN 200N1 Audio Transformer Assembly

For LF Conducted Immunity Testing

EM Test CWS 500N3 Test Generator

Key applications of the CWS 500N3 are in the automotive and aerospace area. Various international standards and MIL requirements call for magnetic field tests in the low frequency range. Apart from this the automotive industry requires conducted immunity tests with superposed sinusoidal signals on the DC supply voltage (ripple noise). For both applications the CWS 500N3 is the perfect equipment including everything in a single box, necessary for these tests. The CWS 500N3 meets requirements of SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E/F/G CS101, CS109 and RS101.

EM Test EFT 500N5.8 Burst Generator up to 4.8kV, w/ Built in 3-Phase Coupler

EM Test EFT 500N5.8 Burst Generator up to 4.8kV, w/ Built in 3-Phase Coupler

EM Test PFS 200N100 Power Fail Simulator 80V100A

The PFS 200N Series Automotive Power Fail simulator is used to comply with standard requirements, mainly from vehicle manufacturers, to perform fast voltage dips ad drops (micro-interruptions). Some standards specify very fast rise and fall times below 1 microsecond an electronic switch.

EM Test PFS 200N200 Power Fail Simulator 80V/200A

The PFS 200N Series Automotive Power Fail simulator is used to comply with standard requirements, mainly from vehicle manufacturers, to perform fast voltage dips ad drops (micro-interruptions). Some standards specify very fast rise and fall times below 1 microsecond an electronic switch.

EM Test PFS 200N30 Simulator

The EM Test PFS 200N30 automotive power fail simulator for voltage dips and interruptions is used to comply with standard requirements including ISO 16750-2, mainly from vehicle manufacturers, to perform fast voltage dips ad drops (micro-interruptions). Some standards specify very fast rise and fall times below 1 microsecond an electronic switch.

Haefely AXOS5 Compact Immunity Test System

Haefely AXOS5 Compact Immunity Tester combines 5kV Burst/EFT, Surge combination wave, AC/DC Dips & Interrupts, along with an integrated single-phase coupling/decoupling network (CDN) into one compact system.

Haefely AXOS8 Compact Immunity Test System

Haefely AXOS8 Compact Immunity Test System, 7 kV integrates all of the best features of several stand-alone test systems into one single economic solution. Standards: IEC/EN 61000-4-4, -4-5, -4-9, -4-11, -4-12

M Precision E411 ECAT EFT Module

EFT/Noise Burst simulator for testing in accordance with IEC 61000-4-4 Edition 2 to 4.4kV.

M Precision E4554KV 3 Phase Coupler/Decoupler EFTB

M Precision E4554KV 3 Phase Coupler/Decoupler EFTB

M Precision E503 ECAT Ring Wave Module

Produces the ring waves specified by ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

M Precision E506-4W ECAT Telecom Surge Simulator

Produces surges required by Telcordia GR-1089 CORE for up to five-wire (four terminal) testing

M Precision E510A Combination Wave ECAT Module

Plug-in module for the Thermo (Keytek) ECAT Modular EMC Test System to produce combination wave specified by ANSI/IEEE C62.41 Cat. B and IEC 61000-4-5

M Precision ECAT E103 Series Control Center

Computer-driven control center and power units required for the operation of any Thermo Scientific ECAT test system.

M Precision ECAT E509A Surge Simulator for Bellcore GR-1089

Bellcore waveforms: 10/1000us 100A waves at 600V, 1kV and 1.5kV; 2 or 3-terminal telecom port surges

M Precision ECAT Module E4551kV Coupler/Decoupler

M Precision EFT/Noise Burst ECAT Module E4551kV; single-phase, 250Vrms, 15/16A (for surge operation up to 10kV). For EFT and Surge waves.