Close
You have no items in your shopping cart.

EM Test VSS 500N10

High Voltage Transient Surge Simulator
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The VSS 500N10 is a surge voltage simulator specifically designed to meet the surge test requirements for safety tests on audio, video and similar apparatus. The standards specify the components for the pulse generation. A special switch is used in the VSS 500N10, designed to avoid any energy to dissipate in arcing or inadequate isulation.

Safety precautions are taken to assure safe operation at this high voltage level. The VSS 500N10 provides interlock and warning lamp control.

iec.control remote control and documentation software allows fully automated testing.

Voltage Surge Simulator, Pulse as Per IEC 60065

  • Voltage (o.c.): 500V - 10,000V ± 10%
  • Surge Capacitor: 1nF
  • Series Resistor: 1,000 ohm
  • Parallel Resistor: >15 Mohm
  • Polarity: Positive
  • Event Counter: 1 - 30,000 or endless

Trigger

  • Automatic: Automatic pulse release
  • Manual: Single pulse release
  • External: External pulse release
  • CRO Trigger: 5V trigger signal for oscilloscope
  • Pulse Repitition Rate: Max. 1 Hz (1s - 999s)

Output

  • Direct: Via HV connecctor; Zi = 1,000 ohm

Interface

  • Optical Interface: Opto link, 3 m cable, USB A connector
  • Parallel Interface: IEEE 488, addresses 1 - 30

Safety

  • Safety Circuit: Control input (24Vdc)
  • Warning Lamp: Floating output contact

General Data

  • Dimensions: 19"/3HU
  • Weight: Approx. 12 kg
  • Supply Voltage: 115/230V +10/-15%
  • Fuses: 2 x 2AT (230V) or 2 x 4AT (115V)
  • EN 60065
  • EN 60950-1
  • IEC 60065
  • IEC 60950-1
  • UL 6500
Description

The VSS 500N10 is a surge voltage simulator specifically designed to meet the surge test requirements for safety tests on audio, video and similar apparatus. The standards specify the components for the pulse generation. A special switch is used in the VSS 500N10, designed to avoid any energy to dissipate in arcing or inadequate isulation.

Safety precautions are taken to assure safe operation at this high voltage level. The VSS 500N10 provides interlock and warning lamp control.

iec.control remote control and documentation software allows fully automated testing.