Teledyne LeCroy WaveSurfer 3054 Oscilloscope

• One probe per channel
• Manuals
• Power cord
• All standard accessories

Vertical System

• Bandwidth: 500MHz
• Risetime: 800ps typical
• Input Channels: four
• Bandwidth Limiters: 20MHz, 200MHz
• Input Impedance: 50Ω ±2.0%, 1MΩ ±2.0%; 16pF
• Input Coupling, 50Ω: DC, GND
• Input Coupling, 1MΩ: AC, DC, GND
• Maximum Input Voltage, 50Ω: 5Vrms, ±10V Peak
• Maximum Input Voltage, 1MΩ: 400V (DC + Peak AC ≤10kHz)
• Channel-Channel Isolation: ≥52dB from DC to 100MHz
• Vertical Resolution: 8-bits
• Sensitivity, 1MΩ: 2mV/div to 10V/div
• Sensitivity, 50Ω: 2mV/div to 1V/div
• DC Gain Accuracy: ±1.5%
• Offset Range, 50Ω: 1mV to 19.8mV: ±2V, 20mV to 100mV: ±1V, 102mV to 198mV: ±20V, 200mV to 1V: ±50V
• Offset Range, 1MΩ: 1mV to 19.8mV: ±2V, 20mV to 100mV: ±5V, 102mV to 198mV: ±20V, 200mV to 1V: ±50V, 1.02V to 1.98V: ±200V, 2V to 10V: ±400V
• Offset Accuracy: ±(1.0% of offset value + 1.5%FS + 1mV)

Analog Acquisition System

• Sample Rate, Single-shot: 2GS/s (4GS/s interleaved)
• Sample Rate, Repetitive: 50GS/s
• Record Length: 10Mpts/ch, all channels
• Acquisition Modes: Real Time, Roll, RIS (Random Interleaved Sampling), Sequence (Segmented Memory up to 1,000 segments with 1Οs minimum intersegment time)
• Real-Time Timebase Range: 1ns/div to 50s/div
• RIS ModeTimebase Range 1ns/div to 10ns/div
• Roll Mode Timebase Range Up to 50s/div (roll mode is user selectable at ≥100ms/div)
• Timebase Accuracy ±10ppm measured over >1ms interval

Digital Vertical and Acquisition System (WS3K-MSO Option Only)

• Input Channels: 16 Digital Channels
• Threshold Groupings, Pod 1: D7 - D0
• Threshold Groupings, Pod 2: D15 - D8
• Threshold Selections: TTL(+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
• Maximum Input Voltage: ±30V Peak
• Threshold Accuracy: ±(3% of threshold setting + 100mV)
• Input Dynamic Range: ±20V
• Minimum Input Voltage Swing: 500mVpp
• Input Impedance (Flying Leads): 100kΩ; 5pF
• Maximum Input Frequency: 125MHz
• Sample Rate: 500MS/s
• Record Length: 10MS - 16 Channels
• Minimum Detectable Pulse Width: 4ns
• Channel-to-Channel Skew: ±(1 digital sample interval)
• User defined threshold range: ±10V in 20mV steps

Triggering System

• Modes: Normal, Auto, Single, Stop
• Sources: Any input channel, External, Ext/5, or line; slope and level unique to each source (except for line trigger)
• Coupling Mode: AC, DC, LF Rej, HF Rej
• Pre-trigger Delay 0 to 100% of Full Scale
• Post-trigger Delay 0 to 10,000 Divisions
• Hold-Off: 10ns to 20s or 1 to 1000,000,000 events
• Internal Trigger Level Range: ±4.1 Divisions
• External Trigger Level Range, Ext: ±610mV
• External Trigger Level Range, Ext/5: ±3.05V
• Trigger Types: Edge, Width, Logic (Pattern), TV (NTSC, PAL, SECAM; HDTV 720p, 1080i, 1080p), Runt, Slew Rate, Interval (Signal or Pattern), Dropout, Qualified (State or Edge); External and Ext/5 support edge trigger only

Measure, Zoom, Math Tools

• Measurement Parameters: Up to six of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base, Delay, Duty Cycle, Fall Time (90%-10%), Fall Time (80%-20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Peak-Peak, Period, Phase, Rise Time (10%-90%), Rise Time (20%-80%), RMS, Skew, Standard Deviation, Top, Width+, Width- (Statistics and histicons can be added to measurements; Measurements can be gated)
• Zooming: Front panel QuickZoom button or touch screen or mouse can be used to draw a box around the zoom area
• Math Functions (up to two of the following functions can be calculated at one time): Sum, Difference, Product, Ratio, Absolute Value, Average, Derivative, Envelope, Floor, Integral, Invert, Reciprocal, Rescale, Roof, SinX/x, Square, Square Root, Trend, Zoom and FFT (up to 1Mpts with power spectrum output and rectangular, VonHann, and FlatTop windows)

Probes

• Quantity: One PP020 Probe (5mm) per channel
• Probing System: BNC and Teledyne LeCroy ProBus for Active voltage, current and differential probes

Interface

• USB, Host: four
• USB, device: one USBTMC
• Ethernet Port: 10/100Base-T Ethernet interface (RJ-45 connector)
• External Monitor Port Standard DB-15 connector (resolution: 1024x600)
• Removable Storage: one MicroSD Port; 8GB microSD card installed standard
• GPIB Port: one (optional)

Power Requirements

• Mains: 100 to 240VAC ±10% @ 50Hz to 60Hz; 100 to 120VAC ±10% @ 400Hz to 420Hz ±5%; Automatic Voltage Selection
• Power Consumption, nominal: 100VA
• Power Consumption, max: 150VA (with all PC peripherals, digital leadset and active probes connected to four channels)

WaveSource Function Generator (Optional)

• Max Output Frequency: 25MHz
• Channels: one
• Frequency Resolution: 125MS/s
• Vertical Resolution: 14-bit
• Vertical Range: ±3V (HiZ); ±1.5V (50Ω)
• Waveform Types: Sine, Square, Pulse, Ramp, Noise, DC
• Frequency, Sine: 1µHz to 25MHz
• Frequency, Square/Pulse: 1µHz to 10MHz
• Frequency, Ramp/Triangular: 1µHz to 300KHz
• Noise: 25MHz (-3dB)
• Frequency Resolution: 1µHz
• Frequency Accuracy ±50ppm, over temperature
• Aging ±3ppm/year, first year
• Amplitude, HiZ: 4mVpp to 6Vpp
• Amplitude, 50Ω: 2mVpp to 3Vpp
• Vertical Accuracy: ±(0.3dB + 1mV)
• Amplitude Flatness: ±0.5dB
• DC Offset Range: ±3V (HiZ); ±1.5V (50Ω)
• DC Offset Accuracy: ±(1% of offset value ±3 mV)
• Impedance: 50Ω ±2%
• Protection: Short-circuit protection
• Sine Spectrum Purity, SFDR (Non Harmonic) @1.265Vpp, DC to 1MHz: -60dBc
• Sine Spectrum Purity, SFDR (Non Harmonic) @1.265Vpp, 1MHz to 5MHz: -55dBc
• Sine Spectrum Purity, SFDR (Non Harmonic) @1.265Vpp, 5MHz to 25MHz: -50dBc
• Sine Spectrum Purity, Harmonic Distortion @1.265Vpp: DC to 5MHz: -50dBc
• Sine Spectrum Purity, Harmonic Distortion @1.265Vpp: 5MHz to 25MHz: -450dBc
• Square/Pulse Rise/fall time 24ns (10% to 90%)
• Square/Pulse Overshoot 3% (typical to 1kHz, 1Vpp)
• Square/Pulse Pulse Width 50ns min
• Square/Pulse Jitter 500ps + 10ppm of period (RMS cycle to cycle jitter)
• Ramp/Triangle Linearity: 0.1% of Peak value output (typical: 1kHz, 1Vpp, 100% symmetric)
• Ramp/Triangle Symmetry: 0% to 100%

Protocol Analysis with Serial Trigger and Decode (WS3K-EMB Option)

• Color-coded overlay presenting information in binary, hex, or ASCII
• Decode long waveforms and zoom in to see precise byte-by-byte decoding
• Use the serial trigger to isolate specific addressed and data
• Decoded information can be conveniently displayed in an interactive table

WaveSurfer 3000-Series Option/Accessory Pricing

• WS3K-FG Function Generator Option: $500
• WS3K-MSO MSO Option Includes lead set and software option card: $1,500
• WS3K-EMB I2C, SPI, UART, RS232 Trigger and Decode: $990
• WS3K-Rack Rack Mount Kit: $490
• WS3K-Softcase Softcase: $475

Data Sheet