EMC | EMI

Select Subcategory

Electromagnetic compatibility (EMC) is the branch of electrical engineering that focuses on protecting electronic devices from the interference of electromagnetic energy. The unintentional generation or reception of electromagnetic energy may cause electromagnetic interference (EMI) and damage the equipment. Along with the steep and continuous increase in electronic device usage comes a corresponding increase in the possibility of interference, making EMC testing more crucial than ever.

The four types of EMC testing include: conducted immunity, conducted emissions, radiated immunity, and radiated emissions. Specific standards have been developed to ensure safety and repeatable results when testing equipment that must be followed. IEC (International Electrotechnical Commission), ISO (International Organization for Standardization), and CISPR (International Special Committee on Radio Interference) work individually and together to create these standards in order to provide solutions to current global change. Our EMC and EMI testing equipment has been designed to fulfill these specific test standards such as MIL-STD-461, EN/IEC-61000-4, and CISPR.

Developers of automotive, medical, defense, aerospace, and consumer electronics technology all rely on EMC testing to ensure devices meet strict industry requirements.

Avalon Test Equipment carries a wide variety of EMC test equipment ranging from ESD guns and RF amplifiers to immunity testers. Browse our inventory by category to fulfill specific testing requirements and Test With Confidence®.

Read Less

3 Items in Grid 4 Items in Grid List

Maury RF Power Amplifiers 2-6GHz, 600W

This device is engineered for a 2-6 GHz frequency range with a 600 W Psat, both typical and minimum. It supports an input power up to 0 dBm and ensures a small signal gain of at least 55 dB. The gain flatness is typically ±2.5 dB, with a 20 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. Harmonic and spurious outputs are well-managed, with a 2nd harmonic power at Psat of -15 dBc and a spur at Psat of -65 dBc. The device is unconditionally stable and is classified under ECCN 3A001.b4.a4. Mechanically, the enclosure type is specified upon contacting Maury, and it has a weight of 277 lbs. It features Type N Female connectors for RF input and 7/16 connectors for RF output. Environmentally, it operates within a temperature range of 0ºC to 50ºC and can be stored from -25ºC to 65ºC, ensuring durability across various environmental conditions.

Maury RF Amplifier, 2-8GHz, 50W

This device is tailored for a 2-8 GHz frequency range and ensures a 50 W Psat, both typical and minimum. It supports an input power up to 2 dBm and provides a minimum small signal gain of 47 dB. The gain flatness is typically ±3 dB, with a 20 dB gain adjustment. The input VSWR is a maximum of 2.1:1, and the output VSWR under Psat is 3:1. Harmonic and spurious emissions are controlled, with a second harmonic at Psat of -15 dBc and spurious at Psat of -65 dBc. Intermodulation distortion is minimized, with IM3 values of -18 dBc at a 3 dB back off, with a 10 MHz tone spacing. The device is unconditionally stable and is classified under EAR99. Mechanically, it features an enclosure type A and weighs 41 lbs, with Type N Female connectors for RF input and output. It operates within a temperature range of 0ºC to 50ºC and can be stored from -25ºC to 65ºC, ensuring reliable performance in various environmental conditions.

Maury RF Power Amplifier 2-8 GHz, 100W

This device is designed for a 2-8 GHz frequency range with a consistent 100 W Psat. It can manage an input power of up to 2 dBm and provides a minimum small signal gain of 52 dB. The gain flatness is typically ±3 dB, and it includes a 20 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. Harmonic and spurious outputs are well-controlled, with a 2nd harmonic power at Psat of -15 dBc and a spur at Psat of -65 dBc. Intermodulation distortion is minimized, with IM3 values of -18 dBc at a 3 dB back off, with a 10 MHz tone spacing. The device is unconditionally stable and is classified under ECCN 3A001.b4.b1.Mechanically, it features an enclosure type A and weighs 43 lbs, with Type N Female connectors for RF input and output. It operates within a temperature range of 0ºC to 50ºC and can be stored from -25ºC to 65ºC, ensuring reliable performance in various environmental conditions.

Maury RF Power Amplifier 2-18 GHz, 20W

This device operates across a 2-18 GHz frequency range with a 20 W Psat, both typical and minimum. It can accommodate an input power of up to 5 dBm and delivers a minimum small signal gain of 41 dB. The gain flatness is typically ±4 dB, and it includes a 20 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. Harmonic and spurious outputs are well-managed, with a 2nd harmonic power at Psat of -15 dBc and a spur at Psat of -65 dBc. Intermodulation distortion is minimized, with IM3 values of -38 dBc at a 13 dB back off and -20 dBc at a 3 dB back off, with a 10 MHz tone spacing. The device is unconditionally stable and is classified under EAR99. For mechanical specifications, it has an enclosure type B and weighs 17.6 lbs, with SMA Female connectors for RF input and output. Environmentally, it is designed to operate in temperatures ranging from 0ºC to 50ºC and can be stored from -25ºC to 65ºC, ensuring reliable performance in various environmental conditions.

Maury RF Power Amplifier 2-18 GHz, 50W

This device is designed for a 2-18 GHz frequency range with a 50 W Psat, both typical and minimum. It supports an input power up to 0 dBm and ensures a minimum small signal gain of 49 dB. The gain flatness is typically ±4 dB, with a 20 dB gain adjustment. The input VSWR is a maximum of 2.1:1, and the output VSWR under Psat is 3:1. Harmonic and spurious emissions are controlled, with a second harmonic at Psat of -15 dBc and spurious at Psat of -65 dBc. Intermodulation distortion is minimized, with IM3 values of -38 dBc at a 13 dB back off and -20 dBc at a 3 dB back off, with a 10 MHz tone spacing. The device is unconditionally stable and is classified under ECCN 3A001.b4. Mechanically, it features an enclosure type A and weighs 48 lbs, with Type N Female connectors for RF input and output. It operates within a temperature range of 0ºC to 50ºC and can be stored from -25ºC to 65ºC, ensuring reliable performance in various environmental conditions. It also offers infinite protection with the optional MPA-COUP feature.

Maury RF Power Amplifiers 2-26.5 GHz, 2W

This device operates within a 2-26.5 GHz frequency range and offers a typical Psat of 2W, with a minimum of 2W. It can handle an input power of up to 0 dBm and provides a minimum small signal gain of 35 dB. The gain flatness is ±4 dB typically, with a 15 dB gain adjustment available. The input VSWR is capped at 2:1, and under Psat conditions, the output VSWR is 3:1. Harmonic suppression includes a 2nd harmonic power at Psat of -15 dBc and a spur at Psat of -65 dBc. Intermodulation performance is rated at -38 dBc with a 13 dB back off and -25 dBc at a 3 dB back off. The unit is unconditionally stable and falls under ECCN EAR99. Mechanically, it features an enclosure type B, weighs 15.5 lbs, and uses SMA Female connectors. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 6-18 GHz, 10W

This unit operates within a 6-18 GHz frequency range and boasts a typical and minimum Psat of 10 W. It accepts an input power of up to 0 dBm and guarantees a minimum small signal gain of 38 dB. The gain flatness is typically ±3 dB, complemented by a 20 dB gain adjustment. The input VSWR does not exceed 2:1, and the output VSWR under Psat is 3:1. Harmonic suppression is effective, with a 2nd harmonic power at Psat of -15 dBc and a spur at Psat of -65 dBc. Intermodulation performance is -35 dBc at a 13 dB back off and -20 dBc at a 3 dB back off. The device is unconditionally stable and is classified under ECCN EAR99. It features an enclosure type B, weighs 20 lbs, and uses SMA Female connectors for RF input/output. Environmentally, it is designed to operate between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 6-18 GHz, 30W

This device features a 6-18 GHz frequency range and a typical and minimum Psat of 30 W. It can handle an input power of up to 0 dBm and delivers a minimum small signal gain of 48 dB. The gain flatness is typically ±3 dB, with a 20 dB gain adjustment. The input VSWR is capped at 2:1, while the output VSWR under Psat is 3:1. Harmonic suppression includes a 2nd harmonic power at Psat of -15 dBc and a spur at Psat of -65 dBc. Intermodulation performance is -35 dBc at a 13 dB back off and -20 dBc at a 3 dB back off. The unit is unconditionally stable and is classified under ECCN 3A001.b4. It has an enclosure type A, weighs 42 lbs, and uses SMA Female connectors. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

RF Power Amplifier 6-18 GHz, 50W

The device operates within a 6-18 GHz frequency range and has a minimum Psat of 50 W. It can accept an input power of up to 3 dBm and ensures a minimum small signal gain of 50 dB. Gain flatness is typically ±3 dB, with a 20 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1, with infinite protection available with Option MPA-COUP. Harmonic performance is maintained with a 2nd harmonic power at Psat of -15 dBc and a spur at Psat of -65 dBc. Intermodulation performance is noted at -37 dBc with a 13 dB back off and -20 dBc with a 3 dB back off. The unit is unconditionally stable and is classified under ECCN 3A001.b4. It has an enclosure type A, weighs 42.3 lbs, and uses Type N Female connectors. Designed for various environments, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 6-18 GHz, 100W

The device operates within a 6-18 GHz frequency range and has a typical and minimum Psat of 100 W. It is designed to accept an input power of up to 0 dBm and provides a minimum small signal gain of 52 dB. The gain flatness is typically ±4 dB, with a 20 dB gain adjustment feature. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1, with the option for infinite protection with Option MPA-COUP. Harmonic performance includes a 2nd harmonic power at Psat of -15 dBc and a spur at Psat of -65 dBc. Intermodulation performance is -20 dBc at a 3 dB back off. The unit is unconditionally stable and falls under ECCN 3A001. It features an enclosure type C, weighs 60 lbs, and uses Type N Female connectors. For environmental adaptability, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 6-18 GHz, 250W

The device is designed for a 6-18 GHz frequency range with a typical and minimum Psat of 250 W. It supports an input power of up to 0 dBm and ensures a minimum small signal gain of 56 dB. The gain flatness is typically ±5 dB, and it offers a 20 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1, with infinite protection available with Option MPA-COUP. Harmonic performance is noted with a 2nd harmonic power at Psat of -15 dBc and a spur at Psat of -65 dBc. Intermodulation performance is typically 18 dBc at a 3 dB back off. The unit is unconditionally stable and classified under ECCN 3A001. It has an enclosure type D, weighs 143 lbs, and uses Type N Female to WRD650 connectors. It operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 8-12 GHz, 100W

The device is specified for an 8-12 GHz frequency range with a minimum Psat of 100 W. It can handle an input power of up to 0 dBm and delivers a minimum small signal gain of 52 dB. The gain flatness is typically ±3 dB, and there’s a 20 dB gain adjustment available. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. Harmonic performance is noted with a 2nd harmonic power at Psat of -35 dBc and a spur at Psat of -65 dBc. Intermodulation performance is -33 dBc at a 13 dB back off and -23 dBc at a 3 dB back off. The unit is unconditionally stable and falls under ECCN 3A001. Mechanically, it has an enclosure type A, weighs 42 lbs, and uses Type N Female connectors. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 18-26.5 GHz, 10W

The device operates within an 18-26.5 GHz frequency range, with a typical and minimum Psat of 10 W. It can handle an input power of up to 5 dBm and ensures a minimum small signal gain of 40 dB. The gain flatness is typically ±3 dB, and there’s a 15 dB gain adjustment available. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. Spurious outputs are managed with a spur at Psat of -65 dBc. The unit is unconditionally stable and is classified under ECCN EAR99. It features an enclosure type B, weighs 15.2 lbs, and uses SMA Female connectors for RF input/output. In terms of environmental specifications, it operates between 0ºC to 50ºC and has a storage temperature range from -25ºC to 65ºC.

Maury RF Power Amplifier 18-26.5 GHz, 25W

The device covers a frequency range of 18-26.5 GHz and has a Psat with a typical output of 25 W and a minimum of 20 W. It can handle an input power of up to 3 dBm and offers a minimum small signal gain of 46 dB. The gain flatness is typically ±4 dB, and there’s a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. It boasts a spur at Psat of -65 dBc and is unconditionally stable. The device is classified under ECCN 3A001.b4 and comes with a 24-month warranty. It features an enclosure type A, weighs 26 lbs, and uses SMA Female/WR42 connectors. In terms of environmental specifications, it operates between 0ºC to 50ºC and has a storage temperature range from -25ºC to 65ºC.

Maury RF Power Amplifier 18-26.5 GHz, 50W

The device operates within a frequency range of 18-26.5 GHz and has both a typical and minimum Psat of 50 W. It is designed to accept an input power of up to 0 dBm and provides a minimum small signal gain of 51 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment available. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. It features a spur at Psat of -65 dBc and is unconditionally stable. The device is classified under ECCN 3A001. Mechanically, it has an enclosure type A, weighs 40 lbs, and uses 2.92mm Female for RF input and WR42 for RF output. Environmentally, it is designed to operate between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 18-26GHz, 100W

The device operates within a frequency range of 18-26.5 GHz and boasts a typical and minimum Psat of 100 W. It is designed to accept an input power of up to 0 dBm and ensures a minimum small signal gain of 51 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1, with infinite protection available with Option MPA-COUP. It features a spur at Psat of -65 dBc and is unconditionally stable. The device is classified under ECCN 3A001 and comes with a 24-month warranty. Mechanically, it has an enclosure type C, weighs 60 lbs, and uses 2.92mm Female for RF input and WR42 for RF output. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 18-40 GHz, 10W

The device is designed for a frequency range of 18-40 GHz and has a minimum Psat of 10 W. It supports an input power of up to 2 dBm and guarantees a minimum small signal gain of 40 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. It features a spur at Psat of -65 dBc and is unconditionally stable. The device falls under ECCN 3A001.b4. Mechanically, it has an enclosure type A, weighs 40 lbs, and uses 2.92mm Female connectors for RF input/output. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 18-40 GHz, 20W

The device is designed for a frequency range of 18-40 GHz and has a minimum Psat of 20 W. It can handle an input power of up to 0 dBm and provides a minimum small signal gain of 43 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1, with infinite protection available with Option MPA-COUP. It features a spur at Psat of -65 dBc and is unconditionally stable. The device falls under ECCN 3A001.b4. Mechanically, it has an enclosure type A, weighs 44 lbs, and uses 2.92mm Female/WRD180C24 connectors for RF input/output. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Amplifier 18-40GHz, 40W

The device is tailored for a frequency range of 18-40 GHz and guarantees a minimum Psat of 40 W. It can accommodate an input power of up to 0 dBm and delivers a minimum small signal gain of 46 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1, with infinite protection available with Option MPA-COUP. It features a spur at Psat of -65 dBc and is unconditionally stable. The device is classified under ECCN 3A001.b4. In terms of mechanical specifications, it has an enclosure type C, weighs 50 lbs, and uses 2.92mm Female/WRD180C24 connectors for RF input/output. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 26.5-40 GHz, 5W

he device is designed for a frequency range of 26.5-40 GHz and has a typical and minimum Psat of 5 W. It accepts an input power of up to 0 dBm and provides a minimum small signal gain of 40 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. It features a spur at Psat of -65 dBc and is unconditionally stable. The device falls under ECCN 3A001.b4. Mechanically, it has an enclosure type B, weighs 16.9 lbs, and uses 2.92mm Female connectors for RF input/output. Environmentally, it is designed to operate between 0ºC to 50ºC.

Maury RF Power Amplifier 26.5-40 GHz, 10W

The device operates within a 26.5-40 GHz frequency range and has both a typical and minimum Psat of 10 W. It is designed to accept an input power of up to 0 dBm and provides a minimum small signal gain of 40 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. It features a spur at Psat of -65 dBc and is unconditionally stable. The device is classified under ECCN 3A001.b4. Mechanically, it has an enclosure type B, weighs 29 lbs, and uses 2.92mm Female connectors for RF input/output. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 26.5-40 GHz, 25W

The device operates within a 26.5-40 GHz frequency range and has a typical Psat of 25 W, with a minimum of 20 W. It can handle an input power of up to 0 dBm and ensures a minimum small signal gain of 43 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. It features a spur at Psat of -65 dBc and is unconditionally stable. The device is classified under ECCN 3A001.b4. Mechanically, it has an enclosure type A, weighs 42.3 lbs, and uses 2.92mm Female for RF input and WR28 flange for RF output. Environmentally, it is designed to operate between 0ºC to 50ºC.

Maury RF Power Amplifier 26.5-40 GHz, 50W

The device is designed for a 26.5-40 GHz frequency range with a typical and minimum Psat of 50 W. It supports an input power of up to 0 dBm and offers a minimum small signal gain of 43 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. It includes a spur at Psat of -65 dBc and is unconditionally stable. Classified under ECCN 3A001.b4, it features an enclosure type C, weighs 59 lbs, and uses 2.92mm Female for RF input and WR28 flange for RF output. Environmentally, it operates between 0ºC to 50ºC and has a storage temperature range of -25ºC to 65ºC.

Maury RF Power Amplifier 26.5-40 GHz, 100W

The device is designed for a 26.5-40 GHz frequency range with a typical and minimum Psat of 100 W. It supports an input power of up to 5 dBm and offers a minimum small signal gain of 50 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1, with infinite protection available with Option MPA-COUP. It features a spur at Psat of -65 dBc and is unconditionally stable. The device is classified under ECCN 3A001.b4. Mechanically, the enclosure type should be confirmed by contacting Maury, it weighs 111 lbs, and uses 2.92mm Female for RF input and WR28 flange for RF output. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 37-43 GHz, 5W

The device is tailored for a 37-43 GHz frequency range with a minimum Psat of 5 W. It can accommodate an input power of up to 2 dBm and delivers a minimum small signal gain of 33 dB. The gain flatness is typically ±4 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. It includes a spur at Psat of -65 dBc and is unconditionally stable. The device is classified under ECCN 3A001.b4. Mechanically, it has an enclosure type B, weighs 14.33 lbs, and uses 2.4mm Female connectors for RF input/output. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury RF Power Amplifier 40-67 GHz, 1W

The device operates within a 40-67 GHz frequency range and has both a typical and minimum Psat of 1 W. It is designed to accept an input power of up to 8 dBm and provides a minimum small signal gain of 26 dB. The gain flatness is typically ±8 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. It features a spur at Psat of -65 dBc and is unconditionally stable. The device is classified under ECCN 3A001. Mechanically, it has an enclosure type B, weighs 18 lbs, and uses 1.85mm Female connectors for RF input/output. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.

Maury Power Amplifier 50-67 GHz, 5W

he device is designed for a 50-67 GHz frequency range with a typical and minimum Psat of 5 W. It can handle an input power of up to 0 dBm and ensures a minimum small signal gain of 33 dB. The gain flatness is typically ±5 dB, with a 15 dB gain adjustment. The input VSWR is a maximum of 2:1, and the output VSWR under Psat is 3:1. It features a spur at Psat of -65 dBc and is unconditionally stable. The device is classified under ECCN 3A001. Mechanically, it has an enclosure type A, weighs 32 lbs, and uses 1.85mm Female for RF input and WR15 flange for RF output. Environmentally, it operates between 0ºC to 50ºC and can be stored from -25ºC to 65ºC.