Close
You have no items in your shopping cart.
Search

Anritsu MW82119A 850 MHz PIM Master®

Manufacturer part number: MW82119A-0850
Battery-operated, High Power Portable, Passive Intermodulation Analyzer with optional Cable and Antenna Analyzer
PURCHASE
Available QTY Price
New:   1
+ -
$21,450.00
Used:   6
+ -
$0.00 Configurations
X

Available Configurations

CELLULAR 850MHZ PIM-MASTER ANALYZER
30010819
$10250
CELLULAR 850MHZ PIM-MASTER ANALYZER
30011298
$0
CELLULAR 850MHZ PIM-MASTER ANALYZER
30015611
$13940
CELLULAR 850MHZ PIM-MASTER ANALYZER
30015642
$11995
CELLULAR 850MHZ PIM-MASTER ANALYZER
30015892
$10250
CELLULAR 850MHZ PIM-MASTER ANALYZER
30015962
$10250
OPTIONS
Name Purchase
High Accuracy Power Meter $590.00
GPS Receiver (requires GPS antenna) $480.00
GPS Antenna for Anritsu PIM, 25dB gain $170.00
Site Master Cable and Antenna Analyzer o $3,500.00
5 Year Extended Service - Anritsu Repair Only $900.00
PIM Master Transit Case; 1610 w/ Custom Foam $750.00
Avalon PIM Testing Accessory Kit Anritsu $2,390.00
Accessory Kit with Hard Case for PIM Master $2,615.00
Precision Open Short Load, N(m), 3 GHz $475.00
6GHz Steel Armored Phase Stable Cable, N(m) - N(f) $425.00
7/16 DIN to N Connector Kit for Sweep Testing, LP $500.00
Low PIM 4.3/10 Connector Kit $500.00
Low PIM Adapters, 4.1/9.5 Connector Kit $500.00

The MW82119A can perform the following measurements enabling test technicians to quickly find and eliminate PIM problems found at the cell site:

  • PIM versus Time
  • Noise Floor
  • Swept PIM
  • Distance-to-PIM (DTP)

The PIM Master includes Anritsu’s patented Distance-to-PIM (DTP) technology for accurately determining the location of PIM faults both inside the feed system as well as beyond the antenna. This technology becomes critically important for fault finding DAS installations due to the complexity of the feed system and a large number of RF interconnects. Without DTP, finding and eliminating PIM requires a process of elimination involving the movement of low PIM loads in the network until the PIM problem disappears. This process is not only time consuming, but it also means that good connections may be opened (and potentially damaged) in the process of locating PIM problems. Distance-to-PIM allows technicians to quickly and efficiently locate PIM sources at a site resulting in quicker site repairs and lower cost.

As with all Anritsu Handheld products, the MW82119A has been designed and tested to rigorous standards for shock, vibration, and temperature extremes to ensure reliable service in an outdoor environment.

  • Soft Carrying Case, Screen Access
  • Shoulder Strap
  • Stylus with Coiled Tether
  • Screen Protector Film, 8.4in
  • Low PIM Adapter, 7/16 DIN(m) to 7/16 DIN(f), 50Ω
  • Anritsu Software Tool Box for Handheld RF Instruments Disc
  • High-capacity Li-Ion, Battery Pack
  • AC/DC Power Supply (Country dependent)
  • AC Power Cable
  • Automotive Power Adapter, 12VDC, 60W
  • Ethernet Cable, 7ft/213cm
  • USB A-mini B Cable, 10ft/305cm
  • Handheld Instruments Documentation Disc
  • Three-year warranty (one-year battery warranty)
  • Certificate of Calibration

Measurements

  • PIM vs. Time: 3rd, 5th, and 7th order intermodulation product when in receive band (user selectable)
  • Distance-to-PIM: Distance and relative magnitude of multiple PIM sources
  • Swept PIM: 3rd, 5th, and 7th order intermodulation product when in receive band (user selectable)
  • Noise Floor: Noise Floor vs. Time at selected IM product frequency

Instrument Setup Parameters

  • Frequency: Carrier F1, Carrier F2, Intermodulation Order (3rd, 5th, 7th)
  • Amplitude: Ref Value, Scale, Auto Range (On/Off), Amplitude Tone (On/Off)
  • Setup: Output Power, Test Duration (1s to 1,200s)
  • Limit Lines: Limit (Upper/Lower), On/Off, Limit Move, Limit Alarm (On/Off, PASS/FAIL indicator)
  • GPS: On/Off, 3.3/5.0V
  • DTP: Cable Velocity, Distance

PCS/AWS

  • Tx1: 1930MHz to 1940MHz
  • Tx2: 1955MHz to 1995MHz
  • Tx3: 2110MHz to 2155MHz
  • Rx1: 1850MHz to 1910MHz (using Tx1 and Tx2)
  • Rx2: 1710MHz to 1755MHz (using Tx1 and Tx3)

PIM Master Connectors

  • Test Port: 7/16 DIN, female, 50Ω
  • Dual USB Type-A: 2x Type A (connect USB Flash Drive and USB Power Sensor)
  • USB Mini-B: 1x Mini-B (connect to PC for data transfer)
  • GPS: SMA, female (with GPS option only)
  • External Power: 2.1 mm x 5.5 mm barrel connector, 12 to 15VDC, <5.0A

Display

  • Size: 213mm (8.4in) touch screen
  • Resolution: 800 x 600

Electromagnetic Compatibility

  • Australia and New Zealand: C-tick N274
  • Interference: EN 61326-1:2006
  • Emissions: EN 55011:2007
  • Immunity: EN 61000-4-2/-3/-4-4/-4-5/-4-6/-4-11
  • European Union: CE Mark, EMC Directive 2004/108/EC

Dimensions

  • Size: 350mm x 314mm x 152mm
  • Weight: 9.0kg to 12.2kg (20lb to 27lb)

Description

The MW82119A can perform the following measurements enabling test technicians to quickly find and eliminate PIM problems found at the cell site:

  • PIM versus Time
  • Noise Floor
  • Swept PIM
  • Distance-to-PIM (DTP)

The PIM Master includes Anritsu’s patented Distance-to-PIM (DTP) technology for accurately determining the location of PIM faults both inside the feed system as well as beyond the antenna. This technology becomes critically important for fault finding DAS installations due to the complexity of the feed system and a large number of RF interconnects. Without DTP, finding and eliminating PIM requires a process of elimination involving the movement of low PIM loads in the network until the PIM problem disappears. This process is not only time consuming, but it also means that good connections may be opened (and potentially damaged) in the process of locating PIM problems. Distance-to-PIM allows technicians to quickly and efficiently locate PIM sources at a site resulting in quicker site repairs and lower cost.

As with all Anritsu Handheld products, the MW82119A has been designed and tested to rigorous standards for shock, vibration, and temperature extremes to ensure reliable service in an outdoor environment.

Product tags