Fluke 8012A Digital Multimeter Bench

Fluke Bench/Portable DMMs Data Sheet

Fluke Digital Multimeters Instruction Manual

• Functions: DC Volts, AC Volts, DC Current, AC Current Resistance and Conductance
• DC Volts
• Imput Impedance: 10 MΩ, all ranges
• Normal Mode Rejection Ratio: >60 dB at 60 Hz 
• Common Mode Rejection Ratio (1 kΩ unbalanced): >60 dB at dc, 50 Hz and 60 Hz
• Overvoltage Protection: 1000V dc or peak ac on all ranges
• Response Time: 1 second
• AC Volts
• Volt-Hz Product: 10^7 max (200V max @ 50 kHz)
• Extended Frequency Response: Typically ±3 dB at 200 kHz
• Common Mode Noise Rejection Ratio (1 kΩ unbalanced): >60 dB at 50 Hz and 60 Hz
• Crest Factor Range: 1.0 to 3.0
• Input Impedance: 10 MΩ in parallel with <100 pF
• Overload Protection: 750 rms or 1000V peak continuous not to exceed the volt-hertz product of 10^7 (except 10 seconds maximum on 200 mV, 2V ranges)
• Response Time: 2 seconds maximum within a range
• Operating Temperature: 0° C to 50° C (32° F to 122° F)
• Relative Humidity: 0 to 80%, 0° C to 35° C (32° F to 95° F) on 2000 kΩ, 20 MΩ and 200 nS ranges; 0 to 90%, 0° C to 35° C (32° F to 95° F) on all other ranges; 0 to 70%, 35° C to 50° C (95° F to 122° F)
• Storage Temperature
• Without Batteries: -40° C to 60° C (-40° F to 150° F)
• With Batteries: -40° C to 50° C (-40° F to 122° F)
• Relative Humidity: 0 to 90%, -40° C to 50° C (-40° F to 122° F); 0 to 90%, 50° C to 60° C (122° F to 140° F)
• Maximum Common Mode Voltage: 500V dc or peak ac
• Power Requirements: 90 to 132V or 200 to 264V at 50 Hz or 60Hz
• Size: 6 x 33 x 25 cm (2.5 x 8.5 x 10 in)
• Weight: 1.08 kg (2.38 lbs)