Close
You have no items in your shopping cart.
Search

Compliance West HT-2800S Hipot Tester

Manufacturer part number: HT-2800S
Compliance West USA HT-2800S Hipot Tester; 0-2800Vdc @ 5mA
PURCHASE
Available QTY Price
New:   0
+ -
$0.00
Used:   0
+ -
$0.00 Configurations
X

Available Configurations

The HT-S series Hipot Tester with adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit setting.

The newest product of Compliance West Hipot Line Testers, the UL Listed HT-S series hipot now comes with an adjustable ground continuity test in range of 0.08 - 1.50 Ω, and Auto-offset for test leads up to 1.00 Ω. Performs 0-2800 DC Hipot Test. Neutral/Hot to Ground Leakage current test up to 5 mA DC. Easy to use and connect. Made in the USA.

Features:

  • High precision leakage current, duration and ground continuity settings.
  • Allows no load setup of leakage current and test dwell times.
  • Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
  • Leakage currents can be set from 1-20 mA AC in 0.1mA increments.
  • Dwell times can be set from 1-60 seconds in 1 second increments.
  • Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
  • Voltage Test Type: DC
  • Maximum Output Voltage: 28000VDC
  • Maximum Leakage Current: 5mA
  • Leakage Current: 1-5mA DC, 0.1mA increments
  • Input Voltage: 120 VAC
  • Frequency: 60 Hz
  • Fuse: 120/230 VAC 2A Slow Blow
  • Breakdown Detect: Independent High Frequency Circuit (50 KHz - 500 KHz)
  • Transformer Power: < 500 VA
  • HV Shutdown by Hipot Fail: < 7 mS
  • Ramp Time Range: 1 - 5 Seconds
  • Test Time Range: 1 - 60 Seconds
  • Discharge Time: < 7 mS for AC,
  • Display: 4 Digits LED Display
  • Voltage Meter Accuracy: ± 2%
  • Leakage Current Accuracy: ± 0.1 mA Accuracy
  • Ground Continuity: 0.8Ω - 1.50Ω Increments of 0.01, Defeatable; Min. Current 100 mA; ± 0.02Ω Accuracy, Defeatable
  • Duty Cycle: 100%
  • Pass/Fail Repeatability: ±3%
  • Operation Temperature: 15 - 40°C
  • Relative Humidity Range: 0 - 90% Non-Condensing
  • Output Connector: NEMA 5-15R Receptacle
  • Dimensions: 9 1/4" W x 4 3/4" H x 10" D
  • Weight: 11 lbs
  • Cables
  • Manual
  • Calibration Certificate
Description

The HT-S series Hipot Tester with adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit setting.

The newest product of Compliance West Hipot Line Testers, the UL Listed HT-S series hipot now comes with an adjustable ground continuity test in range of 0.08 - 1.50 Ω, and Auto-offset for test leads up to 1.00 Ω. Performs 0-2800 DC Hipot Test. Neutral/Hot to Ground Leakage current test up to 5 mA DC. Easy to use and connect. Made in the USA.

Features:

  • High precision leakage current, duration and ground continuity settings.
  • Allows no load setup of leakage current and test dwell times.
  • Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
  • Leakage currents can be set from 1-20 mA AC in 0.1mA increments.
  • Dwell times can be set from 1-60 seconds in 1 second increments.
  • Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
Product tags