Close
You have no items in your shopping cart.

Kaelus iXA Low/High Band 700 MHz Portable PIM Analyzer

Manufacturer part number: IXA-0707A
Avalon guarantees 24-hour turnaround for all Kaelus PIM analyzer calibrations!
PURCHASE
Available QTY Price
New:   1
+ -
$29,167.00
Used:   0
+ -
$0.00 Configurations
X

Available Configurations

OPTIONS
Name Purchase
ASSY121966: Hard Transport Box for iXA $700.00

The Kaelus iXA Series Passive Intermodulation (PIM) analyzer is a dual port, battery powered PIM Test Analyzer. It supports multiple test scenarios such as testing at the top of the tower, the base of the tower, rooftop, inbuilding for DAS systems and external PIM Finding.

No other PIM tester has ever been integrated to this level! The iXA includes a network of electronic switches to change from one-port to two-port measurement seamlessly. In addition, with integrated Range-to-Fault (RTF) on each port, the user can first troubleshoot the system for internal PIM. Then, without reconnection, the user can progress with the external PIM process, making the entire process much more efficient.

With integrated RTF on each port, the user can collect four times more range-to-fault data than the standard 1-port PIM Finder solution. Thus, the user can easily locate and swiftly eliminate the strongest PIM source.

Features: 

  • Rugged and reliable; designed with tower climbers in mind
  • Fully configurable frequencies, powers and IM products
  • Remote control possible with handheld device, e.g. tablet, cell phone
  • Simple to operate touch screen interface
  • Extensive reporting capabilities
  • Spectrum monitor, frequency sweep and time trace modes
  • Inbuilt Range-to-Fault (RTF) on both ports
  • Battery powered
  • Dual-port 40W mode for optimum external PIM Finding

SYSTEM - 1 PORT MODE

Measurement method: Reverse (reflected) PIM, 3rd, 5th and 7th order.

Residual PIM: <-123dBm/-166dBc maximum (<-128dBm/-171dBc typical) @2x43dBm

Power per tone (adjustable): 0.5W to 20W (+27 to +43dBm in 1dB increments)

 

SYSTEM - 2 PORT MODE

Measurement method: Reverse (reflected) PIM, 3rd, 5th and 7th order.

Cross band Residual PIM (*): <-123dBm/-166dBc maximum (<-128dBm/-171dBc typical) @2x46dBm

Power per tone (adjustable): 1W to 40W (+30 to +46dBm in 1dB increments)

Note: (*) 25dB Port to Port isolation assumed

 

SYSTEM

Interface ports: 2x RF output (7-16 DIN female), 1x USB 2.0 Host, 1x USB 2.0 Slave, 1x SD

1x monitor port (SMB female), 1x SMA-RP (Wi-Fi external antenna)

User interface:

  • Local - touch screen display 4.3in (109mm)
  • Remote - tablet, computer, any Wi-Fi enabled user device with web browser

Return loss alarm: Automatic detection and shut down when high RL is detected

Compliance: IEC-62037

 

TRANSMITTER

Transmit frequencies: See data sheet

Frequency increment: 100kHz

Frequency accuracy: ± 5ppm maximum, aging ± 1ppm maximum after first year

Power accuracy (per tone): ± 0.5dB maximum

 

RECEIVER

Receive band (100kHz steps): See data sheet

Measurement noise floor: < -128dBm

Measurement range: -50dBm to -128dBm

 

ELECTRICAL

Battery power: 25.9 VDC, 3450 mAh, 90Wh Lithium Ion battery packs (removable)

Battery operating time: Depends on usage, 3 hr minimum per battery pack

Battery charger Output: 29.4 VDC, 1.2 Amp

 

MECHANICAL

Dimensions: H x D x W 397 x 205 x 240mm | 15.6 x 8 x 9.4in

Weight: 19kg | 42lbs

 

ENVIRONMENTAL

Temperature range: -10ºC to +45ºC | +14°F to +113°F

Ingress protection: IP54. IP67 when enclosed in optional hard case

Operational humidity: 5% to 95% RH non-condensing

Storage temperature range: -10°C to +60°C | +14°F to +140°F

Mechanical shock: 40G shock rating

Description

The Kaelus iXA Series Passive Intermodulation (PIM) analyzer is a dual port, battery powered PIM Test Analyzer. It supports multiple test scenarios such as testing at the top of the tower, the base of the tower, rooftop, inbuilding for DAS systems and external PIM Finding.

No other PIM tester has ever been integrated to this level! The iXA includes a network of electronic switches to change from one-port to two-port measurement seamlessly. In addition, with integrated Range-to-Fault (RTF) on each port, the user can first troubleshoot the system for internal PIM. Then, without reconnection, the user can progress with the external PIM process, making the entire process much more efficient.

With integrated RTF on each port, the user can collect four times more range-to-fault data than the standard 1-port PIM Finder solution. Thus, the user can easily locate and swiftly eliminate the strongest PIM source.

Features: 

  • Rugged and reliable; designed with tower climbers in mind
  • Fully configurable frequencies, powers and IM products
  • Remote control possible with handheld device, e.g. tablet, cell phone
  • Simple to operate touch screen interface
  • Extensive reporting capabilities
  • Spectrum monitor, frequency sweep and time trace modes
  • Inbuilt Range-to-Fault (RTF) on both ports
  • Battery powered
  • Dual-port 40W mode for optimum external PIM Finding