Close
You have no items in your shopping cart.
Search

Phenix PD2U Partial Discharge Detector

Manufacturer part number: PD2U
Partial discharge (PD) measurements are a proven method for effective, non-destructive evaluation of electrical insulation.
PURCHASE
Available QTY Price
New:   0
+ -
$0.00
Used:   0
+ -
$0.00 Configurations
X

Available Configurations

Partial discharge (PD) measurements are a proven method for effective, non-destructive evaluation of electrical insulation.

The PD2U provides a simple pushbutton interface with an LCD display. Display modes include a simple PD charge meter with adjustable “needle” sensitivity, monochrome phase-resolved PD patterns for characterization of defects, and a scope-like display showing phase-summed charge pulses superimposed with the applied voltage wave. High voltage is displayed showing the waveform and calculates Û, Û/√2, Urms.

Although the PD2U is a stand-alone unit, it can be connected to a computer to capture screenshots or to implement remote control of the unit.

Features

  • Voltage measurement
  • Backlit LCD 240 x 128 dots
  • Scope and meter display
  • Auto-range function
  • Automatic storage of current settings
  • Internal (line 50/60 Hz) and external synchronization (15-510 Hz)
  • Universal serial interface (USB, up to 921 kB)
  • Input: 100-240 VAC, 50/60 Hz
  • Power: 25 VA
  • Input Impedance: 1 MΩ / 200 pf
  • Input Voltage: Max. 120 V (rms)
  • Frequency: 20-510 Hz
  • Coupling: AC
  • Input Impedance: 50 Ω (without RPA)
  • Low Frequency Cutoff: 40, 80, or 100 kHz
  • High Frequency Cutoff: 250, 600, or 800 kHz
  • Temperature Range: 10°C – 45°C
  • Humidity: <95% non-condensing
  • Altitude: 
  • Dimensions: 236 x 295 x 133 mm ( 9 3/8 x 11 1/2 x 5 1/4")
  • Weight: 3 kgs (7lbs)
Description

Partial discharge (PD) measurements are a proven method for effective, non-destructive evaluation of electrical insulation.

The PD2U provides a simple pushbutton interface with an LCD display. Display modes include a simple PD charge meter with adjustable “needle” sensitivity, monochrome phase-resolved PD patterns for characterization of defects, and a scope-like display showing phase-summed charge pulses superimposed with the applied voltage wave. High voltage is displayed showing the waveform and calculates Û, Û/√2, Urms.

Although the PD2U is a stand-alone unit, it can be connected to a computer to capture screenshots or to implement remote control of the unit.

Features

  • Voltage measurement
  • Backlit LCD 240 x 128 dots
  • Scope and meter display
  • Auto-range function
  • Automatic storage of current settings
  • Internal (line 50/60 Hz) and external synchronization (15-510 Hz)
  • Universal serial interface (USB, up to 921 kB)